ThingMagic M5e-Compact - Manual (Page 179)

Get Application Commands
Command Set 179
Region codes
To get the current region send the following command:
The command generates the following reply, which indicates that the reader is set to the
NA region:
Get Power Mode (68h)
The Get Power Mode command returns the current Power Mode of the unit. The values
for the available
Power Modes are shown in the table.
Region Code
NA 0x01
EU 0x02
KR 0x03
IN 0x04
PRC 0x06
EU2 0X07
EU3 0x08
KR2 0x09
AU 0x0B
NZ 0x0C
Open 0xFF
FF 00 67 1D 68
SOH Length OpCode CRC
FF 01 67 00 00 01 B4 80
SOH Length OpCode Status Region CRC