ThingMagic M5e-Compact - Manual (Page 3)

3
Revision Table
Date Version Description
2/2008 Rev1 Separated out M4e content and Reader Assistant into standalone
documents. Created new M5e Family DevGuide
2/2008 Rev1 Updated TX Power section to correct TX Write power note.
2/2008 Rev1 Fixed Send CW Signal content with correct value for PRBS signal.
3/2008 Rev1 Added input voltage details to M5e/C Hardware comparison table.
3/2008 Rev1 Added FCC and IC Regulatory Statements
3/2008 Rev1 Updated timestamp field in Tag Read Meta Data description to indi-
cate its ticks from read command invocation.
3/2008 Rev1 Added details on new functionality for release 1.0.37:
• M5e EU info (Hardware Support)
• PRC (China) region support (get/set Current Region)
• Support for user control of Gen2 Q value (Get/Set Protocol
Parameter)
• LBT on/off and LBT Threshold setting in supported regions
(Get/Set Current Region) and LBT default settings in
Regulatory Support section.
• Custom NXP Silicon Commands (Tag Specific)
• Get Reader Statistics
• Get tag read metadata with Read Tag Single
• Get tag read metadata with Read Tag Data
• Read Tag Multiple with Tag Singulation
• Read Tag Multiple with embedded commands
• Updates to Tag Select functionality
4/2008 Rev1 Added Gen2 Memory Map and algorithm information to Tag Singu-
lation section.
4/2008 Rev2 Added information on Transmit mode power consumption to Trans-
mit Modes
4/2008 Rev2 Corrected NXP command:
• names: changed ‘Quiet’ to ‘ReadProtect’
• EAS Alarm and Calibrate syntax