Get current program (0ch), Error status codes, Write flash sector (0dh) – ThingMagic M5e-Compact User Manual
Page 72: Boot loader commands, Fault_msg_wrong_number_of_data – 100h
Boot Loader Commands
72
Command Set
Get Current Program (0Ch)
The Get Current Program command returns a code for the current program being
executed in the module. These codes are defined as follows:
To get the current program command, send the following to the module:
The module responds as follows, indicating that it is a M5e/M5e-Compact application
program:
Error Status Codes
FAULT_MSG_WRONG_NUMBER_OF_DATA – 100h
Write Flash Sector (0Dh)
The Write Flash Sector command is the same as the old Write Flash (01h) except it
has an extra flash sector argument. This allows future Mercury Embedded products to
work with the same command set.
Code
Program
0x11
M5e/M5e-C Bootloader
0x12
M5e/M5e-C Application
FF
00
0C
1D
03
SOH
Length
OpCode
CRC
FF
01
0C
00
00
12
63
43
SOH
Length
OpCode
Status
Program
CRC
FF
0F
0D
02
25
44
10
00
00
00
00
02
12
34
56
78
90
12
73
4C
SOH
Lengt
h
OpCod
e
Password
Start Address
Sector
Data To Write
CRC