Talkswitch 24-CA - Manual (Page 10)

V I I I T A L K S W I T C H US E R G U I D E • N O R T H A M E R I C A
If you are installing a single, non-VoIP, TalkSwitch unit, anyone with basic
computer skills can use the TalkSwitch Start Guide and this user guide to
perform a full installation and configuration.
TalkSwitch system installations can be categorized into some general
configurations, such as single unit installation, networked units installation,
VoIP or non-VoIP installation, etc. This section helps you determine your
best possible plan of action using this guide, according to your installation
type. While not every possible installation scenario is detailed below,
determine which one better fits your situation and use its guidelines as a
starting point. Chapter 6: Troubleshooting and Support on page 181 provides
solutions for common problems and the index at the back is a means to
quickly navigate to specific areas.
Single unit installation
When installing a single, non-VoIP TalkSwitch unit, you can skip the sections
marked with the Networked and VoIP icons.
Networked units installation
When installing networked TalkSwitch units, you require the sections marked
with the Networked icon.
VoIP installation
When installing a VoIP enabled unit, you require the sections marked with
the VoIP icon. Chapter 5: VoIP Information on page 155 provides an
additional resource.
Connecting devices
When connecting phones and other devices to your TalkSwitch unit(s),
1.7 Connect TalkSwitch to a network or a PC on page 9 provides the
information you need.