Talkswitch 24-CA - Manual (Page 174)

1 6 2 T A L K S W I T C H US E R G U I D E • N O R T H A M E R I C A
Figure 126: TalkSwitch network configuration
5.4 VOIP CONFIGURATION
5.4.1 Configure TalkSwitch IP addresses
Each TalkSwitch system in a multi-location network must be configured with
both local IP and public IP address information. These addresses are used to
direct VoIP calls to the appropriate location. Each TalkSwitch unit in a
system will have a different local IP address, and share a common public
IP address.
5.4.1.1 Set the TalkSwitch local IP address
The following steps describe how to set the local IP address(es) of a
TalkSwitch system:
1. Open the TalkSwitch configuration software by double-clicking the
TalkSwitch icon on your Desktop or, from the Windows Start menu,
select Programs, the TalkSwitch folder, and click TalkSwitch.
2. In the TalkSwitch System Configuration window, select
System Information -> IP Configuration from the menu at the left.
3. TalkSwitch is factory configured to use DHCP (Dynamic Host
Configuration Protocol) to automatically obtain its system IP settings. If
the location has a DHCP server, which is typically a function of the
router, the fields on the screen will automatically be filled in with the
Telephone
Network
Internet
New York office
TalkSwitch 48-CVA
Miami home
Mediatrix 2102
San Francisco
office
TalkSwitch 48-CVA
(SIP server)
251
252
253
254
255
261 266
262 267
263 268
264 269
265
271