Talkswitch 24-CA - Manual (Page 71)

T A L K S W I T C H C O N F I G U R A T I O N 5 9
8. If you have a 3-Way Calling or Transfer and Clear service from the phone
company, click the checkbox next to Use Same Line Connect.
9. Save settings to the unit.
Figure 58: Remote extensions
Once your remote extensions are configured, calls can be forwarded by the
auto attendant or transferred by someone in your office. There are 10
remote extensions available per TalkSwitch unit.
Use Same Line Connect
Check this box to allow incoming calls to use the same line when
forwarding it to the remote extension. This feature allows only one line
to be used when forwarding incoming calls to a remote extension. It can
only be used when the line of the originating incoming call has 3-Way
Calling/Conference or Transfer service (Centrex/Plexar). If the line does
not have any of these services, the call will be forwarded using the hunt
group chosen in the Connect using: drop-down list.
If you have a Transfer and Clear service on your line(s) and want to have
TalkSwitch clear lines after forwarding calls to remote extensions, you
need to enable Clear telephone line after call transferred (Options ->
Transfer Options). If your service requires the remote extension to
answer the call before the transfer can be made, use one of the screening