Talkswitch 24-CA - Manual (Page 124)

1 1 2 T A L K S W I T C H US E R G U I D E • N O R T H A M E R I C A
Other options include:
•
Voicemail Screening (used in a home environment)
• Demo with a router (used for demonstrating the product)
• Static VoIP Demo (used strictly for demonstrating two TalkSwitch CVA
units connected to a hub or a switch and acting as two separate
locations.
Auto Attendant Transfer Prompts
TalkSwitch can disable playing of transfer prompts to callers when
redirecting calls from the auto attendant.
SIP Server Registration
Select the Re-registration Interval between 2 and 60 minutes from the drop-
down list. The re-registration interval on your IP phones may differ, but
TalkSwitch will use the time specified here. See Figure 109 on page 110.
2.6.5 Troubleshooting
Do not change the following controls unless you are familiar with the effect
they have on the TalkSwitch operation. If your system does not appear to be
functioning properly, please contact your dealer for assistance.
Figure 110: Troubleshooting
Flash lengths
Accepted Flash length:
These options control the flash length allowed from a local extension
that TalkSwitch considers to be an intentional flash. The range can be
adjusted to accept anything from 300 ms to 1 second. The default range
for accepting a flash signal at a local extension is between 400 ms and
800 ms. Most phones emit a 600 ms flash signal when the Flash or Link
button is pressed.