Talkswitch 24-CA - Manual (Page 29)

T A L K S W I T C H I N S T A L L A T I O N 1 7
1.8.2.1 Connecting a regular single-line telephone
This is the basic, simple set-up. All functionality including transferring calls,
forwarding calls and voicemail, is handled by the unit. Even the most basic
of phones, once connected, will inherit these functions.
Figure 16: Single-line telephone
Each phone is connected to a single
extension. A call transferred to
extension 111 will ring the phone
connected on jack E1. A call
transferred to extension 112 will ring
the phone on jack E2 and so on.
1.8.2.2 Connecting a regular dual-line telephone
Most dual-line phones have separate plug-ins for two incoming telephone
lines (Line 1 and Line 2). If your dual-line telephone does not have separate
plug-ins, you can use a Line 1/Line 2 splitter to separate the two lines as
shown in Figures 17 and 18.
You can plug the dual-line phone into the TalkSwitch unit using one or two
extension jacks. Figure 17 below shows a dual-line phone using one jack.
Figure 18 on page 17 shows a dual-line telephone plugged into the unit
using two jacks.
Figure 17: Dual-line telephone on one jack
TalkSwitch extension 111 is connected
to a dual-line phone using one
extension jack. Calls on extension 111
show Line 1 as active.
Figure 18: Dual-line telephone on two jacks
TalkSwitch extensions 111 and 112 are
connected to a dual-line phone using
two extension jacks. Calls on extension
111 show Line 1 as active. Calls on
extension 112 show Line 2 as active.
E1 E2 E3 E4
TalkSwitch Jacks
Incoming Phone Lines
Extensions 111 112 113 114
E1 E2 E3 E4
TalkSwitch Jacks
Incoming Phone Lines
Line Splitter
Extension 111
E1 E2 E3 E4
TalkSwitch Jacks
Incoming Phone Lines
Extensions 111 and 112