Talkswitch 24-CA - Manual (Page 48)

3 6 T A L K S W I T C H US E R G U I D E • N O R T H A M E R I C A
3. Enter a system password in the System Password field. It has to be a
4- to 8-character numeric password, so that you can also enter it on a
touchtone phone.
Figure 34: Username and password for a VoIP enabled unit
To enter a new password:
1. Click in the System Password field.
2. Type a password and click OK.
To change the password:
1. Click in the System Password field.
2. Type a new password and click OK.
To delete a password:
1. Click in the System Password field.
2. Do not enter anything and click OK.
Caution: If you leave the password field blank and you are connected to
the Internet using TCP port 9393 mapped to the unit, the system will be
vulnerable to configuration changes by anyone on the Internet!