Talkswitch 24-CA - Manual (Page 113)

T A L K S W I T C H C O N F I G U R A T I O N 1 0 1
6. In the field next to Number used to trigger Auto Call Back:, enter the
home/office number that you will call to trigger the auto call back. The
drop-down list allows you to select any of the telephone lines connected
to your unit.
Figure 100: Configuring auto call back
7. To prevent unauthorized use of your call back feature, click the checkbox
next to Use password on Call Back and enter a password.
8. Click the checkbox next to Allow Call Bridge, to allow call bridge after a
call back has been accepted. You may restrict the call bridge line access
by selecting the Hunt Group Access button. Call bridge is enabled when
call back is activated with the same password you entered at the auto
attendant.
If you need to configure and/or record an announced message from a
remote location and do not have the auto attendant set up to answer this
call back line, you can call your call back number and let it ring 15 times.
A generic auto attendant will answer. You can then configure call back by
pressing 6.
For a 2-second pause, dial 0 and for a , dial . When you
have completed the entire dial string, press .
* # * #
#