Talkswitch 24-CA - Manual (Page 66)

5 4 T A L K S W I T C H US E R G U I D E • N O R T H A M E R I C A
4. In the drop-down menu next to If a fax call is detected:, select go to local
extension and select 118 (113 for units with 4 extension jacks).
Figure 53: Fax routing
5. Save settings to the unit.
Set up at least one auto attendant to answer all incoming calls, play a
recorded message, allow callers to dial their party’s extension or dial 0 for a
receptionist. For more information, see 2.4.2.1 Adding/configuring an auto
attendant on page 80.
2.2.7 Local extensions
Local extensions can be analog phones connected to any of the extension
jacks at the back of TalkSwitch or IP phones on the same subnet registered
with your TalkSwitch system. For more details on connectivity, see
1.8 Connecting devices on page 15. Local extensions are activated with the
associated voice mailbox by default. Voice mailboxes for each local
extension can be de-activated in the Voicemail folder.
Activating a local extension for use with an analog (regular) phone
By default, all analog extension ports are active. Plug phones into the
extension ports and you are ready to make and receive calls.
Figure 54: Analog extension