Talkswitch 24-CA - Manual (Page 155)

U S I N G T A L K S W I T C H 1 4 3
3.10 MODE SWITCHING OPTIONS
Manual mode switching
Use telephone keypad commands at a local extension or at the auto
attendant to switch modes.
1. Dial at the local extension dial tone or at the auto attendant to
enter command mode.
2. Enter a password if required.
a) Dial 30 to check the current mode.
b) Dial 31 to activate mode 1.
c) Dial 32 to activate mode 2.
Automatic mode switching using the time scheduler
Use the configuration software to activate the TalkSwitch time scheduler
feature. You can configure TalkSwitch to switch between modes
automatically (see 2.4.1 Modes on page 78).
If you switch modes manually, TalkSwitch switches to the proper mode
during the next scheduled mode change.
If you have two or more units on a LAN, we recommend that you load a
.wav file to the system of units. If you use an external music source,
supply a music source to each TalkSwitch unit. 1/8" audio splitters are
available at most electronics stores.
Ensure that the TalkSwitch configuration software tool is closed at the
time of the scheduled mode switch. The mode cannot change if the
configuration software is open.
#
#
#
#