Talkswitch 24-CA - Manual (Page 134)

1 2 2 T A L K S W I T C H US E R G U I D E • N O R T H A M E R I CA
4. Press Flash 4 to complete the transfer. Do not hang up to complete the
transfer because this disconnects the call.
Screened Transfer
Instead of completing the transfer once you have dialed the outside
number, wait until the call is answered and ask the recipient at the
extension if he or she wishes to take the call. If the recipient accepts the
call, press Flash 4 to complete the transfer, if not, press Flash 5 to return to
the caller.
3.2.6 Parking and retrieving calls at a local extension
Call park is a feature for placing a call on hold and then retrieving it from
another local extension. TalkSwitch has 10 park orbits (500–509).
3.2.6.1 Parking a call
1. Press Flash and 510. TalkSwitch selects the first available park orbit
(500–509). If you use a TS-80, TS-200, TS-400 or TS-600 phone, press the
Park button or softkey.
2. You hear a confirmation indicating that the caller has been parked
successfully and into which park orbit.
3.2.6.2 Retrieving a parked call at another local extension
The person who parked the call notifies the person at the extension for
whom the call is parked (e.g. “Mary, there is a call parked for you in 500”).
1. Press and the appropriate park orbit. If you use TS-80, TS-200,
TS-400 or TS-600 phone, press the Un-park button or softkey and enter
the park orbit. If Direct Line Access is enabled at the extension, you must
press Flash first.
If you have the 3-way calling/conference or a Centrex transfer feature
enabled on the current line, select the Same Line Connect (80) to make
use of these features. Everything proceeds as above on the same line the
call came in.
If Direct Line Access is enabled at your extension, press Flash before
retrieving the parked call.
*
* *