Talkswitch 24-CA - Manual (Page 162)

1 5 0 T A L K S W I T C H U S E R G U I D E • N O R T H A M E R I C A
Figure 117: CDR web interface
4.2.2 Serial interface — Real-time to Serial Port
In order to capture the data in a real-time environment your PC has to be
connected to TalkSwitch unit ID 1 with a serial cable.
1. Launch Hyper Terminal by clicking Start -> Programs ->
Accessories -> Communications -> HyperTerminal.
2. A window pops up prompting for a connection name. Enter TalkSwitch,
then click OK.
Figure 118: Launching HyperTerminal
3. In the Connect using: drop-down menu, select the PC COM port where the
serial cable is connected and click OK.
If you have not used HyperTerminal before you will be prompted to set
this program as a default telnet application and enter your area code.