Talkswitch 24-CA - Manual (Page 26)

1 4 T A L K S W I T C H US E R G U I D E • N O R T H A M E R I CA
1.7.5 File connection
You can load the latest configuration file saved on a PC to make edits and
save it again as a file or save it directly to TalkSwitch.
1. Double-click the TalkSwitch icon on your desktop to open the
configuration software. The dialog box below displays.
2. From the drop-down list next to Connection Type, select File.
Figure 13: File connection
3. Click the Browse button and select the configuration file you wish to
open and click Open.
Figure 14: Open TalkSwitch configuration file
4. Click Connect....
5. The TalkSwitch System Configuration window opens.
See Figure 30 on page 29.
When a unit is being configured, it is locked to prevent other computers
or persons using a phone from configuring changes at the same time. If
you leave the software open for longer than one hour, the unit unlocks
itself to allow configuration changes.