Pointmaker CPN-5800 - Manual (Page 107)

Boeckeler Instruments, Inc. Pointmaker CPN-5800 Color Video Marker - Page 101
Section Five:Image Mobility Image Manipulation
2. Enter the image index number for the image you wish to retrieve and select
OK.
Only the number is to be entered. The prefix of the file is determined by the
settings in the Image File dialog(see Figure 3-14: File Defaults dialog, on page
46). If you have changed the prefix setting in order to help group files for a
particular purpose, make sure the prefix in the Image File dialog matches the
prefix of the file you are attempting to retrieve.
The file extension must be “bmp”.
The image is displayed on the screen.
Printing Images
The CPN-5800 allows you to print to a color Postscript printer either directly or
over a TCP/IP network. If you print directly, the configuration requires a USB to
Centronics cable. Contact Boeckeler Instruments if you want to use a direct
connection. To print over a TCP/IP network requires an ethernet cable and the
address of the printer (see Printer Setup, on page 63).
To print an image
1. Print an image in one of the following ways:
a) (touch screen) Touch the Center-Right command area.
b) (digital tablet) Activate the “Print” button.
c) (keyboard) Type “Alt-F4”.
2. The image is sent to the printer.
A counter appears at the lower-right portion of the screen, indicating the
percentage of the image sent to the color Postscript printer.
When the counter reaches 100, it disappears. The system is then ready to print
another image.