Pointmaker CPN-5800 - Manual (Page 60)

Page 54 - Pointmaker CPN-5800 Live Streaming Annotation System Pointmaker LLC.
Serial Port Settings Section Three: CPN-5800 Menu System
Designating a Serial Device Type
1. Activate the menu system (see Activating the Menu, on page 29).
The Main Menu appears (see Figure 3-1: Main Menu, on page 30).
2. Select DEVICES.
The Devices menu appears (see Figure 3-19: Devices menu, on page 50).
3. Select SERIAL PORTS.
Figure 3-24: Serial Ports Dialog
The Serial Ports dialog appears.
NOTE: All the serial ports installed on your CPN-5800 are listed by
port number, with the device type displayed to the right of each num ber.
If the device type is in blue, it has been assigned through the autodetect
procedure at startup.
4. (optional) Select the device type you wish to have permanently assigned.
If the device type can be permanently assigned (some types cannot), the color
changes from blue to black. With the device permanently assigned, the next
time the CPN-5800 is powered up, the autodetect procedure will skip this
port. If the assigned device needs to be ini tialized at startup, it will be
initialized according to the device type listed.
NOTE: If the device type listed for a port cannot be permanently
assigned (for example: device type “unknown” or if you try to assign
more than one port for use with other systems (see Integrating the