V) select an overlay, Vcd) display change of video input, Vi) video input – Pointmaker CPN-5800 User Manual
Page 137
Pointmaker LLC
Pointmaker CPN-5800 Color Video Marker - Page 131
Section Six:Using RS-232 Commands Overview
(V) Select an Overlay
The “V” command tells the Pointmaker which overlay to display.
<Esc>(V#
Display overlay number specified.
replace # with overlay number desired.
<Esc>(VN
Display next overlay.
<Esc>(VP
Display previous overlay.
NOTE: To hide the overlay, see the Pass-through (PA) command.
(VCD) Display Change of Video Input
The “VCD” command tells the Pointmaker whether to display a change of video
input on the monitor.
<Esc>(VCDØ
Do not display a change in the video input
<Esc>(VCD1
Display a change in the video input
<Esc>(VCDT
Toggle between the two modes
(VI) Video Input
The “VI” command tells the Pointmaker to move forward or backward in
choosing a video input.
<Esc>(VIN
Next video input
<Esc>(VIP
Previous video input