Pointmaker CPN-5800 - Manual (Page 46)

Page 40 - Pointmaker CPN-5800 Live Streaming Annotation System Pointmaker LLC.
Setting Video Output Section Three: CPN-5800 Menu System
The unit senses the type of video input and selects it automatically. If there is
no video input and you are using the unit in Chalkboard mode, the Default
selection allows you to assign the appro priate video output for your monitor.
Setting Video Output
The CPN-5800 gives you a wide range of video parameters for fine tuning your
video output.
1. Activate the menu system (see Activating the Menu, on page 29).
The Main Menu appears (see Figure 3-1: Main Menu, on page 30).
2. Select DISPLAY.
The Display menu appears (see Figure 3-6: Display Menu, on page 39).
3. Select VIDEO OUTPUT.
Figure 3-8: Video Output dialog
The Video Output dialog appears next to the Main Menu.
This dialog has screen ratio buttons of 4x3, 16x9 and 16x10. Selecting one of
the buttons allows you to then select from the resolutions and vertical refresh
rates listed below.
4x3 16x9 16x10
640x480 @ 60,72,75,85 1280x720p @ 60 1280x800 @ 60
800x600 @ 56,60,72,75 1920x1080p @ 60 1440x900 @ 60
1024x768 @ 60,70,72,75,85 1680x1050 @ 60