Pointmaker CPN-5800 - Manual (Page 125)

Pointmaker LLC Pointmaker CPN-5800 Color Video Marker - Page 119
Section Six:Using RS-232 Commands Overview
(EM) Erase Method
The “EM” command activates your choice of erase methods.
<Esc>(EMØ Erase Method: “UNDO”
<Esc>(EM1 Erase using Small eraser
<Esc>(EM2 Erase using Medium eraser
<Esc>(EM3 Erase using Large eraser
(ESP, ESA) Video Streaming (CPN-5800)
The “ESP” and “ESA” commands give you control over the video streaming
features of the CPN-5800. The ESP setting is not applied until the ESA command
is sent.
<Esc>(ESPØ Video streaming off
<Esc>(ESP1 Video streaming on
<Esc>(ESPT Video streaming toggle between the two settings
<Esc>(ESA Apply the last “ESP” setting
(FS) Frame Size
The “FS” command defines an active frame.
<Esc>(FSXXXXYYYY Designating the size of an active frame.
XXXX = a numeric value for the horizontal dimension.
YYYY = a numeric value for the vertical dimension.
Units range from ØØØ1 to 2Ø48.