Cpw) read specific image from smb, Cs) color selection – Pointmaker CPN-5800 User Manual
Page 119
Pointmaker LLC
Pointmaker CPN-5800 Color Video Marker - Page 113
Section Six:Using RS-232 Commands Overview
(CPW) Read Specific Image From SMB
The “CPW” command reads an image from the SMB server. This com mand uses
the current Computer and Share names assigned for capturing images. The nnnnn
part of the command is the index number of the image you want to read.
<Esc>(CPWnnnnn
Read the requested image from the SMB location
nnnnn is the index number of the image
(CS) Color Selection
The “CS” command handles color attributes of an active marker. These com mands
will force an “enable” of the color selected without having to enable that color
using the “CE” commands or going to the Menu System.
<Esc>(CSB
Select Black
<Esc>(CSC
Select Cyan
<Esc>(CSD1
Display Color Change
display a sample block of the new color. May be desired if a
pointer is not being displayed. The option may not be desired
if you wish to change col ors during a live broadcast.
<Esc>(CSDØ
Do not display color change
<Esc>(CSDT
Toggle color change display
<Esc>(CSE
Select Previous Color
<Esc>(CSG
Select Green
<Esc>(CSHG
Select Green Highlight Color
<Esc>(CSHP
Select Pink Highlight Color
<Esc>(CSHY
Select Yellow Highlight Color
<Esc>(CSMH
Select Highlight Color Mode
<Esc>(CSMM
Select Multiplex Color Mode
<Esc>(CSMT
Toggle between color modes
<Esc>(CSN
Select Next
get next available color (see “(CE) Color Enable” on p.101).
<Esc>(CSP
Select Pink
<Esc>(CSR
Select Red
<Esc>(CSW
Select White
<Esc>(CSY
Select Yellow