Pt) pointer type (px) proximity on/off, Pt) pointer type, Px) proximity on/off – Pointmaker CPN-5800 User Manual
Page 130
Page 124 -
Pointmaker CPN-5800 Color Video Marker
Pointmaker LLC
Overview
Section Six:Using RS-232 Commands
(PT) Pointer Type
The “PT” command controls the display of pointer types contained in the
Pointmaker.
<Esc>(PTC
Displays Circle
<Esc>(PTDL
Display Down Left Arrow
<Esc>(PTDØ
Display Down Arrow
<Esc>(PTDR
Display Down Right Arrow
<Esc>(PTL
Display Left Arrow
<Esc>(PTN
Hide Pointer
<Esc>(PTP
Display Cross Hairs
<Esc>(PTR
Display Right Arrow
<Esc>(PTSC
Display Small Circle
<Esc>(PTSP
Display Small Cross Hairs
<Esc>(PTT1
Enable pointer toggle.
<Esc>(PTT2
Turn pointer off.
<Esc>(PTT3
Turn pointer on.
<Esc>(PTT4
Toggle pointer on/off.
<Esc>(PTT5
Display next pointer
selects next pointer in the sequence.
<Esc>(PTTØ
Disable pointer toggle.
<Esc>(PTUL
Display Up Left Arrow
<Esc>(PTUØ
Display Up Arrow
<Esc>(PTUR
Display Up Right Arrow
(PX) Proximity On/Off
The “PX” command controls the pen proximity feature of digitizing tablets. When
proximity is on, active pointers disappear when the pen is lifted from the drawing
area. When proximity is off, active pointers remain on-screen when the pen is
lifted.