Daktronics All Sport 4000 Series - Manual (Page 19)

Basic Operation
3-3
Note: Not all prompts must be answered. The following menu functions may be available:
1. RESTART GAME Y/N
Yes - Restarts the present sport with default settings
No - Exits menu
2. NEW CODE Y/N
Yes - Prompts
Resume Game?, as if power to the console had interrupted (refer to
Section 3.5)
No - Exits menu
3. TEAM NAME Y/N
Yes - Prompts the user to enter team names (refer to Section 13)
No - Exits menu
4. SELECT 24HR Y/N (time of day only)
Yes - Selects 24 hour mode for time of day
No - Selects 12 hour mode for time of day
5. SYNC SHOT CL Y/N (Basketball)
Yes - Synchronizes the shot clock with the game clock
No - Allows the shot clock to run independently of the game clock
Note: When set to “Yes” (synchronous), the shot clock always stops when the game
clock stops. The shot clock starts when the game clock starts (if the shot clock start
switch is ON). When set to “No” (non-synchronous), the shot clock is not affected by the
game clock. It starts or stops only from its own switches.
6. BLNK SHOT CL Y/N (Basketball)
Yes - Shot clock time will blank when greater or equal to game time
No - Shot clock time will display at all times
7. SET MAX FOUL Y/N (Basketball)
Yes - Sets the maximum number of team fouls that will be displayed on the scoreboard.
Incrementing the team fouls will not go beyond this setting.
No - Exits Menu
8. SET PER END Y/N (Hockey, Soccer)
Yes - Sets the period end time when clock is in count up mode
No - Exits menu
9. SHOW TIMEOUT Y/N (Basketball)
Yes - Sets to show time out time on scoreboard.
No - Time out time will not show on scoreboard
10. RLY CLK STOP Y/N (Hockey)
Yes - Sets relay to activate on clock stop.
No - Selects relay to activate on main clock = 0:00
11. SHOW EVENT Y/N (Track)
Yes - Selects display of Event/Heat Data from OmniSport Input.
No - Selects display of Event/Heat Data from keyboard entry.