Introduction – Daktronics All Sport 4000 Series User Manual

Page 9

Advertising
background image

Introduction

1-1

Model #

Description

4100

120 Volt, Standard Programming

4120

230 Volt, Standard Programming

4900

120 Volt, Custom Programming

4920

230 Volt, Custom Programming

Section 1: Introduction


1.1

How To Use This Manual

This manual explains the operation of the All Sport 4000 Series control console. For questions

®

regarding the safety, installation, operation or service of this system, please refer to the telephone
numbers listed on the cover page of this manual.

Important Safeguards:

1.

Read and understand these instructions before installing.

2.

Do not drop the control console or allow it to get wet.

3.

Do not let any power cord touch hot surfaces or hang over the edge of a table which
would damage or cut the cord.

4.

If an extension cord is necessary, use a three-pronged, polarized cord. Arrange the cord
with care so it is not tripped over or pulled out.

5.

Always turn off and/or unplug the control equipment when not using it. Never yank the
power cord to pull the plug from the outlet. Grasp the plug and pull to disconnect.

6.

To avoid electrical shock, do not disassemble the control equipment or the driver modules.
Incorrect reassembly can cause electric shock, faulty operation, or permanent damage to
the circuits.

1.2

Console Overview

The All Sport 4000 Series console is a state-of-the-art scoring
and timing system. The console’s Liquid Crystal Display
(LCD) will guide you through the operation of the system.

T
h
e
r
e
a
re four console models in the All Sport 4000 Series that
differ by voltage and/or programming. This table lists
these consoles:

As a safety feature, this product has a 3-wire ground type plug equipped with a third (grounding)
pin. This plug only fits into a grounding-type power outlet.

Note: If you are unable to insert the plug into the outlet, contact a qualified electrician to replace the
obsolete outlet.

When opening the packages, inspect for shipping damage such as rattles and dents. See that all
equipment is included as shown on the packing slip. Immediately report any deficiencies to

Advertising