Daktronics All Sport 4000 Series - Manual (Page 75)

Boxing
20-1
Section 20: Boxing
Refer to the information in Section 3 to start up the console and use the sport insert. Read Section 3
carefully to fully understand the following operator instructions and for MENU KEY operations.
20.1 Sports Insert LL-2347
Reference Drawing: Insert, Boxing Code 291 . . . . . . . . . . . . . . . . . . . Drawing A-96892
The code for boxing is 291.
< SET ROUND TIME ! >
Edits the length of round time
<
SET REST TIME
!>
Edits the rest time
<
ROUND NUMBER
!>
Edits round number. The round number will be automatically incremented at the end of the rest
period.
<
ROUND NUMBER +1 >
Increments the round number by one
<
MAXIMUM ROUND NUMBER
!>
Edits the maximum number of rounds. The rounds will be automatically incremented up to this
number.
Automatic Timing
The console can be set to do automatic or manual timing. When set to automatic timing, the
console will count down the round time and sound the horn when the clock reaches 0:00. The
console will then reset and begin counting down the rest time. When it reaches 0:00, the horn will
sound again. The console will reset the time for the next round and automatically start counting
down.
If it is set for manual timing, the clock will stop at the end of each rest interval and wait for the
<
START > key to be pressed.
Select automatic or manual timing by pressing the < MENU > key and pressing the down arrow key
until AUTO TIMING Y/N is shown on the LCD. Press < Y > for automatic or < N > for manual.