Daktronics All Sport 4000 Series - Manual (Page 43)

Track/Swimming Operation
9-3
9.4 Sprint Timing Operation
Install the overlay (LL-2267) onto the All Sport console. Power up the All Sport console and
enter either code 41 or 43. Both codes will work on all Daktronics basketball and football
scoreboards.
After the console is powered up and the code is entered, press < TRAINING MODE >< ENTER >. The
console is now in the training mode ready to time sprints. No further operation on the All Sport
console is required. The console is automatically reset when the tape switch is activated (held
down) for three seconds. The entire scoreboard will blank when the timer is reset and ready to
time the sprinter. As soon as the sprinter releases the tape switch, the scoreboard will begin to
display the time. The time will stop when the photo cell beam is broken. To time the next sprinter,
press and hold the tape switch until the scoreboard blanks.