SP Controls SmartPanel - Manual (Page 43)

SmartPanel Configuration and Installation Guide Page 39
© 2002-8 SP Controls, Inc. 930 Linden Avenue South San Francisco CA 94080 w
ww.spcontrols.com
Equalization
Bass and treble settings are configurable on a per channel basis. Knob order matches that of
input mapping on the Projector Selection tab; input one is leftmost.
Each step cuts or boosts the signal by 2dB. At either extreme, equalization settings boost or cut a
channel’s signal by 12dB.
Defeating equalization
The Defeat EQ Settings check box disables all channel-wise equalization settings. This feature
is useful for “A-B” comparisons of clean and equalized versions of the same signal. Checking this
box accomplishes the same thing as setting all EQ settings to flat, but preserves your settings.
By default this box is not checked.
Note: Equalization settings are preserved in the Panel’s configuration, and are restored when the
box is unchecked.