SP Controls SmartPanel - Manual (Page 58)

Page 54 SmartPanel Configuration and Installation Guide
www.spcontrols.com © 2002-8 SP Controls, Inc. 930 Linden Ave. So. San Francisco CA 94080
Inserting the Modules
(SM2-CHAS ONLY)
Screw each of your four
Modules into place with the
three screws provided.
See Coordinating Input
Mapping with Modules and
Legends for a discussion of
Module placement.
Note: As shown, the long
screw goes in the top
hole.
longer
screw
Figure 24: Attaching the Modules.
Note position of the long
screw.