H3C Technologies H3C Intelligent Management Center - Manual (Page 118)

108
a. Click the Import icon next to the proposal number.
The Select IKE Proposals window appears. This window automatically filters IKE proposal
templates that do not match the IKE Authentication method set in "
Configuring default IPsec
and IKE settings ."
You can add, modify, and delete IKE proposal templates in IKE Proposals. For more
information about IKE proposal templates, see " Managing IKE proposals ."
b. Enter the complete name or part of the name of the IKE proposal template you want to query,
and click Query.
c. Select the IKE proposal template in the IKE Proposal List.
d. Click OK.
The parameters in the IKE proposal template are automatically filled in the IKE proposal
configuration page.
e. Click OK.
Adding IPsec tunnels
1. Click the Service tab.
2. From the navigation tree, select IPsec VPN Manager > IPsec Resources > VPN Domains.
3. Click a VPN domain name to enter the VPN domain page.
4. Click Global Setup to view VPN domain configuration, including basic VPN domain settings and
security proposals.
For more information about VPN domains, see "
Adding IPsec VPN domains ."
5. Click Back.
6. Click Add in the Tunnel List area to add IPsec tunnels as follows:
a. Select a hub device.
b. Select spoke devices.
c. Configure interfaces for IPsec tunnels.
d. Configure IPsec tunnels
7. Click OK.
Selecting a hub device
1. Click Select Hub.
A window appears for you to select a hub by view through step 2 or by query through step 3. You
can add only one hub device.
2. Add a hub by view:
a. Click the By View tab.
There are three types of view: IP View, Device View, and Custom View.
b. Collapse a view.
All devices for the view are displayed at the upper right of the window.
c. Select a device in the Devices Found list and click the Add selected icon to add the device
to the Selected Devices list.