Deleting gre over ipsec tunnels – H3C Technologies H3C Intelligent Management Center User Manual
Page 184
174
To undeploy GRE over IPsec tunnels:
1.
Click the Service tab.
2.
From the navigation tree, select IPsec VPN Manager > IPsec Resources > VPN Domains.
The VPN Domain List displays all VPN domains.
3.
Click the name of a GRE over IPsec VPN domain.
The Tunnel List displays all tunnels in the domain.
4.
Select the tunnels you want to undeploy.
Only tunnels with a deployment status of Deployed, Deployment Failed, Undeployment Failed, or
BIMS Deploying can be undeployed.
5.
Click Undeploy in the Tunnel List area.
A confirmation dialog box appears.
6.
Click OK.
After the operation is complete, the Undeployment Result page displays the operation result. If
failures exist, the failure reasons are displayed. Follow the instructions to manually clear the tunnel
configuration on the endpoint devices.
7.
Click Back to go back to Tunnel List page.
Deleting GRE over IPsec tunnels
Deleting a tunnel deletes the tunnel configuration from IVM but does not affect existing tunnels that are
established using the tunnel configuration. Tunnels with a deployment status of Deploying, Being
Undeployed, BIMS Deploying, or BIMS Undeploying cannot be deleted.
To delete GRE over IPsec tunnels:
1.
Click the Service tab.
2.
From the navigation tree, select IPsec VPN Manager > IPsec Resources > VPN Domains.
The VPN Domain List displays all VPN domains.
3.
Click the name of the GRE over IPsec VPN domain whose tunnels you want to delete.
The Tunnel List displays all tunnels in the domain.
4.
Select the tunnels you want to delete.
5.
Click Delete.
A confirmation dialog box appears.
6.
Click OK.
TIP:
To remove a tunnel from both the tunnel endpoint devices and IVM, first undeploy the tunnel from the
endpoint devices, and then delete the tunnel configuration from IVM.
Changing the deployment status of an undeployment failed
GRE over IPsec tunnel
Tunnels that have been successfully undeployed have a deployment status of Undeployed, and those
failed to be undeployed have a deployment status of Undeployment Failed. Operators can manually