H3C Technologies H3C Intelligent Management Center - Manual (Page 156)

146
{
Begin Time—Set the statistics collection start time. Click the field to select the time in the
calendar that appears. The valid format is YYYY-MM-DD hh:mm.
{
End Time—Set the statistics collection end time. Click the field to select the time in the calendar
that appears. The valid format is YYYY-MM-DD hh:mm.
3. Click OK.
The IKE tunnel inbound dropped packets report appears.
Figure 45 IKE tunnel inbound dropped packets report
Parameter description:
{
Statistical Range—IPsec tunnels involved in the report.
{
From/To—Statistics collection start time and end time of the report.
{
Tunnel Name—IPsec tunnel name.
{
Local Subnet—Local end of the IPsec tunnel.
{
Remote Subnet—Remote end of the IPsec tunnel.
{
Dropped Packets—Number of IKE packets dropped in the inbound direction of the IKE tunnel.
{
Bar graph—Each bar graph shows the statistics for an IKE tunnel.
IPsec tunnel transmit rate report
IPsec VPN, GRE over IPsec VPN, and DVPN are established based on IPsec tunnels. IVM can collect
statistics for the data transmit rate of these IPsec tunnels.
To view the IPsec tunnel transmit rate report:
1. Click the Report tab.
2. In the My Real Time Reports area, click the IPsec tunnel transmit rate report link.
The parameter setting page appears.
{
Statistical Range—Select the tunnels of which you want to collect statistics. Options include All
tunnels and VPN domain names created in IVM. If you select All tunnels, the report involves the
tunnels in the network domains, as well as the tunnels not configured through IVM.
{
Begin Time—Set the statistics collection start time. Click the field to select the time in the
calendar that appears. The valid format is YYYY-MM-DD hh:mm.