H3C Technologies H3C Intelligent Management Center - Manual (Page 154)

144
6 IVM service report
The IVM service report function is implemented through the report function of the IMC Platform. The IMC
Platform uses report templates to generate real-time reports and scheduled reports. Operators can use
the user-defined report templates generated by iAR or the report templates provided by IVM to generate
reports.
All IMC Platform reports are available in the Report tab. For information about the reports, see HP
Intelligent Management Center v7.0 Enterprise and Standard Platform Administrator Guide. This
example describes how to generate real-time reports and scheduled reports by using IVM report
templates.
Table 10 IVM report templates
Template name Real-time report Scheduled report
IKE tunnel outbound dropped packets report Available Available
IKE tunnel inbound dropped packets report Available Available
IPsec tunnel outbound drop rate report Available Available
IPsec tunnel transmit rate report Available Available
IPsec tunnel receive rate report Available Available
IPsec tunnel inbound drop rate report Available Available
Real-time report
By specifying certain report parameters, operators can quickly view IVM real-time reports in the Report
tab of the IMC Platform. Operators can export real-time reports in the format of RPT, PDF, XLS, RTF, or CSV,
and print the reports.
Each IVM report template can be used to generate real-time reports.
IKE tunnel outbound dropped packets report
You can establish an IPsec tunnel manually or through IKE. An IPsec tunnel established through IKE uses
an IKE tunnel for automatic key negotiation and IPsec SA establishment. IVM can collect statistics for the
IKE packets dropped in the outbound direction of the IKE tunnel. These packets are sent to the peer end
of the tunnel.
To view the IKE tunnel outbound dropped packets report:
1. Click the Report tab.
2. In the My Real Time Reports area, click the IKE tunnel outbound dropped packets report link.
The parameter setting page appears.
{
Statistical Range—Select the tunnels of which you want to collect statistics. Options include All
tunnels and VPN domain names created in IVM. If you select All tunnels, the report involves the
tunnels in the network domains, as well as the tunnels not configured through IVM.