Synchronizing ipsec devices, Deleting ipsec devices, Setting tunnel traps – H3C Technologies H3C Intelligent Management Center User Manual
Page 34
24
7.
Select one or more BIMS devices you want to import.
8.
Click OK.
The Device List displays information about the selected devices, including the device label, device
type, and device model.
9.
Click OK to start importing the BIMS devices on the Device List.
IVM displays the import result after the import operation is complete.
Synchronizing IPsec devices
IVM periodically synchronizes the device IPsec configuration at the device synchronization interval
configured in the IMC Platform. You can also manually synchronize the IPsec configuration for IPsec
devices. After the synchronization, IVM automatically discovers and monitors IPsec tunnels on the IPsec
devices.
To manually synchronize IPsec devices:
1.
Click the Service tab.
2.
From the navigation tree, select IPsec VPN Manager > IPsec Resources > IPsec Devices.
The IPsec Device List displays all IPsec devices.
3.
Select the IPsec devices you want to synchronize.
4.
Click Synchronize.
The operation result page displays the synchronization result. If failures occurred, the failure
reason is also displayed.
Deleting IPsec devices
You can manually delete IPsec devices from IVM.
Deleting an IPsec device from IVM does not delete the device from the IMC Platform or from BIMS, but all
the IPsec configurations, including the tunnel and VPN domain settings on the device, are deleted.
To delete IPsec devices:
1.
Click the Service tab.
2.
From the navigation tree, select IPsec VPN Manager > IPsec Resources > IPsec Devices.
The IPsec Device List displays all IPsec devices.
3.
Select the IPsec devices you want to delete.
4.
Click Delete.
A confirmation dialog box appears.
5.
Click OK.
Setting tunnel traps
To monitor tunnel setup and disconnect events on an IPsec device, you can configure it to send traps to
IMC whenever an IPsec tunnel is set up or disconnected. IVM records the tunnel setup and disconnect
history for individual IPsec devices. You can view a tunnel trap details from IMC's Real-Time Alarms and
All Alarms views. For more information, see HP Intelligent Management Center v7.0 Enterprise and
Standard Platform Administrator Guide.