HEIDENHAIN PWM 20 User Manual
Page 138
Advertising
November 2014
Software description
139
The result list shows whether all parameters relevant for the functional check are available and
filled. The list depends on the connected encoder.
Green tick = pass
Red X = fail
During forced dynamic sampling the error generators in the encoder and the consistency of the
data stored in the encoder are checked.
The error messages supported by the encoder are assigned to the test cases 1 to 16
("T1" ... "T16"). Depending on the encoder, different test cases - also for errors 1 and errors 2 -
are supported.
Advertising