HEIDENHAIN PWM 20 - Manual (Page 47)

48 HEIDENHAIN ATS Software User's Manual
Details of encoder status:
Reset errors / warnings
Attention
Please reset the errors and warnings before starting!
After you connect the encoder by the ATS software, errors caused by encoder components
may be displayed, although actually there is no malfunction.
If the error messages cannot be reset and new error messages are generated, the encoder
needs to be replaced or repaired.
Note
A given encoder does not necessarily support all monitoring functions. The information
which errors and warnings an encoder supports can be read out and displayed with the
following ATS software function.