HEIDENHAIN PWM 20 - Manual (Page 65)

66 HEIDENHAIN ATS Software User's Manual
8 Press the "function-specific view" button (display in plain language).
8 Press the "EnDat" button ("Load encoder configuration from encoder").
The encoder data is transferred from the encoder memory to the test unit.
8 Open the tree structure of the "Operating parameters" directory.
In the "Value" column of the table you find the datum shift in measuring steps. For measuring
lengths up to 32 bits word 0 and word 1 are used, for measuring lengths up to 48 bits word 2 is
used in addition.