HEIDENHAIN PWM 20 User Manual
Page 67
Advertising
68
HEIDENHAIN ATS Software User's Manual
2. Editing in the datum shift window:
8
Clicking the button right from "Datum shift value" opens the "Datum shift"
window.
Here the value (decimal/hexadecimal/binary) can be edited; click OK to confirm.
8
Click the "EnDat" button ("Save encoder configuration in encoder") to open the
window for selecting the memory area.
8
Select the "Operating parameters" memory area.
8
Click the "Transfer" button to save the data in the encoder.
Note
Entering the value 0 cancels the datum shift.
Attention
If the datum shift is manually edited in the operating parameters area, the ATS software
does not check, whether the entry value is EnDat-compliant.
Advertising