HEIDENHAIN PWM 20 User Manual
Page 96
Advertising
November 2014
Software description
97
Example: ECN rotary encoder
If the deviation span is extremely high (red display), check the setting of the incremental
counting direction
.
9
Warning "EnDat non-compliant datum shift"
10
Permitted accuracy deviations [LSB] at defined speed ranges [rpm]
11
Rotational speed at deviation; if green lines are shown, this range is not supported.
12
Adapt the counting direction of the incremental counter, if the counting direction of a
programmable SSI rotary encoder was reprogrammed.
Advertising