Load encoder configuration from encoder – HEIDENHAIN PWM 20 User Manual
Page 77
Advertising
78
HEIDENHAIN ATS Software User's Manual
Load encoder
configuration
from encoder
8
Press the "EnDat" button ("Load encoder configuration from encoder").
The encoder configuration is transferred from the encoder memory to the computer.
The encoder data are displayed in a tree structure.
Display of the tree when an EnDat 2.2 encoder is connected:
Display of the tree when an EnDat 2.1 encoder is connected:
Tool bar for encoder configuration
Note
These tree views are examples.
The display may vary depending on the encoder and interface specifications and on the
product key used.
Advertising