HEIDENHAIN PWM 20 - Manual (Page 206)

November 2014 Checking incremental encoders 209
6.4 Mounting wizards
6.4.1 General information
For mounting certain encoders, special adjustment programs (mounting wizards) are required.
In general, these encoders are exposed models where the scanning head must be precisely
adjusted to the circular or linear scale.
The ATS software automatically activates the mounting wizard (the encoder must be connected
automatically through its ID), if it is required for mounting.
The mounting wizards are self-explanatory to a large degree.
The mounting wizards are described in the encoder mounting instructions.