4 add-on info (endat 2.2): temperature display – HEIDENHAIN PWM 20 User Manual
Page 91
Advertising
92
HEIDENHAIN ATS Software User's Manual
5.4
Add-on info (EnDat 2.2): Temperature display
8
When you double-click the "Temperature display" button the current temperature values the
of sensors 1 and 2 are displayed.
Note
Display and scope of function may vary depending on the EnDat interface, the product key
and the connected encoder!
Not all encoders support temperature display. From the "Temperature display" icon you can
see, whether the function is available.
Advertising