Load encoder configuration from encoder – HEIDENHAIN PWM 20 User Manual
Page 79
Advertising
80
HEIDENHAIN ATS Software User's Manual
Load encoder
configuration
from encoder
8
With the button "Load encoder configuration from encoder" the data stored in
the encoder are transferred to the computer, and the tree view of the encoder
configuration is displayed (see sections “Display encoder memory” on page 77
and “Load encoder configuration from encoder” on page 78).
Note
HEIDENHAIN recommends saving the loaded encoder data on a computer.
(See section “Save encoder configuration to a file” on page 79.)
Advertising