Canon PowerShot SX70 HS Digital Camera - Manual (Page 175)

„
Registering CANON iMAGE GATEWAY
Link the camera and CANON iMAGE GATEWAY by adding CANON iMAGE
GATEWAY as a destination Web service on the camera.
Connect the devices near the access point, because you will need to press
the WPS button.
Note that you will need to enter an email address used on your computer
or smartphone to receive a notification message for completing linkage
settings.
1
Press the button.
2
[ ]
3
Accept the agreement to enter an
email address.
z Read the agreement displayed and
choose [I Agree].
4
Establish a connection with an
access point.
z [Connect with WPS] → [WPS (PBC
mode)] → [OK]
z Press the WPS button on the access
point.
z Choose [Auto setting] on the camera’s [IP
address set.] screen.
175