Changing the is mode settings, Using digital tele-converter, Storing the zoom or mf position – Canon PowerShot SX70 HS Digital Camera User Manual
Page 251
Tracking AF
z
[AF operation] is set to [
] and cannot be changed.
z
Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
z
[ ] is not available.
z
To set to [
], press the button and choose [
].
Moving the AF Point
z
You can also return the AF point to the original position in the center by
holding down the
button.
z
Changing the IS Mode Settings
z
The [IS mode] setting changes to [On] for movie recording, even if
[Shoot only] is set.
z
If image stabilization cannot prevent camera shake, mount the camera
on a tripod or take other measures to hold it still. Additionally, you
should set [IS mode] to [Off] when using a tripod or other means to
secure the camera.
z
Using Digital Tele-Converter
z
The shutter speed at maximum telephoto (when you move the zoom
lever or zoom button all the way toward ) may match the speed when
zooming in to enlarge subjects with digital zoom.
z
Storing the Zoom or MF Position
z
By choosing
[Recall zoom/MF settings] → [MF memory] → [On]
before manually focusing, you can retain the manual focus status for
the next time you turn on the camera.
z
In
/
mode, the camera returns to the zoom position where
settings were registered.
251