Adding a date stamp, Adjusting image brightness (exposure compensation), Changing the iso speed – Canon PowerShot SX70 HS Digital Camera User Manual
Page 248
z
Adding a Date Stamp
z
Shots taken without adding a date stamp can be printed with one as
follows.
However, adding a date stamp this way to images that already have
one may cause it to be printed twice.
-
Print using printer functions
-
Use camera DPOF print settings to print
z
Adjusting Image Brightness (Exposure
Compensation)
Auto Exposure Bracketing (AEB Shooting)
z
To clear the AEB setting, set the AEB amount to 0, following the
configuration procedure.
z
AEB shooting is available only in /
/
/ /
/
modes without
using the flash.
z
If exposure compensation is already in use, the value specified for that
function is treated as the standard exposure level for AEB.
z
Changing the ISO Speed
z
Although choosing a lower ISO speed may reduce image graininess,
there may be a greater risk of subject and camera shake in some
shooting conditions.
z
Choosing a higher ISO speed will increase shutter speed, which
may reduce subject and camera shake and enable sufficient flash
illumination for subjects farther away. However, shots may look grainy.
248