Canon PowerShot SX70 HS Digital Camera - Manual (Page 222)

z Using a Lens Hood (Sold Separately)
For wide-angle shots of backlit subjects without using the flash, attach
optional Lens Hood LH-DC90 (sold separately) to prevent light outside the
angle of view from entering the lens.
1
Attach the lens hood.
z Make sure the camera is off.
z Align the lens hood mark (2) with the
camera mark (1), and turn the lens hood
in the direction of the arrow until it locks
in place.
z To remove the lens hood, turn it in the
opposite direction.
z To attach the lens hood inverted (as
shown) when the hood is not used, align
the lens hood mark (2) with the camera
mark (1), and turn the lens hood in the
direction of the arrow until it locks in
place.
(2)
(1)
(2)
(1)
222