Fostex VM200 User Manual
Page 116
Outputs
116
VM200 UserÕs Guide
Monitoring AUX Sends
You can monitor the REC BUSS OUT signal by connecting the MON-
ITOR OUT jacks to an amplifier and speakers. Set the Mon Sel (Mon-
itor Select) parameter on the
1:CLOCK/MON
page to AUX1, AUX2,
AUX3, or AUX4 (see page 98).
You can also monitor the REC BUSS OUT signal through a pair of ste-
reo headphones connected to the PHONES jack. For more informa-
tion, see “Monitoring Signals” on page 97.
Viewing the AUX Send and Master Setting
You can view the AUX Send level and send master level on meters
that appear on the
CH VIEW
function page and the Channel Edit/Out-
puts function page respectively.
To view the AUX Send level, press the
[CH VIEW]
key to display the
1:CH VIEW
function page, press a Page Select key to select the desired
channel layer, and press the
[EQ EDIT]
key for the Aux Send channel.
You can display the
CHANNEL EDIT/OUTPUTS
function page to view the
AUX Send master level by pressing the
[CHANNEL/METER]
key twice.
See “Monitoring Signals” on page 97 for more information.