Fostex VM200 - Manual (Page 35)

[SOLO] Keys
VM200 User’s Guide 35
[SOLO] Keys
The [SOLO] keys enable you to solo channels for monitoring.
The Solo Mode parameter on the SETUP:SYSTEM 1:CLOCK/MON function
page determines how signals from each channel will solo. They can
solo individually (PFL, or pre-fader listen) or after being mixed
together post-fader (M-SOLO, or mix solo).
In Channel Fader Mode, the [SOLO] keys solo channels 1-20, depend-
ing on the channel layer you select using the Page Select keys.
The [SOLO] keys control various functions depending on the current
Fader Mode. In Fader Mode Aux1 for example, [SOLO] key 1 solos
channel 1, and the Master [SOLO] key solos the AUX1 Buss. In Fader
Mode Eff2, [SOLO] key 1 solos channel 1, and the Master [SOLO] key
solos the Eff2 Send Master.
The following table describes the function of the Channel and Master
[SOLO] keys in each Fader Mode:
[SOLO] key function
CH Input Channel
Master
Mode 1–8 (ANALOG IN) 9–16 (ADAT IN) 17–20 (EFF RTN)
CHANNEL
Channel Solo
ST BUSS Solo
AUX1 AUX1 Solo
AUX2 AUX2 Solo
AUX3 AUX3 Solo
AUX4 AUX4 Solo
EFF1 EFF1 Send Solo
EFF2 EFF2 Send Solo