Fostex VM200 - Manual (Page 45)

Connecting the Power Cord
VM200 User’s Guide 45
Connecting the Power Cord
Use the included power cord to connect the VM200 to an appropriate
AC electrical outlet. Insert the female end into the AC input on the
rear panel of the VM200. Insert the male end into a wall outlet of an
appropriate voltage for your area.
Turning the VM200 On and Off
The power button is located on the rear panel of the VM200 next to
the AC power cable input jack. When you power on your audio com-
ponents, be certain to follow this sequence to prevent damage to your
equipment:
1.
Connect all instruments and sound sources, including key-
boards, drum machines, etc.
2. Turn on the power to all sound sources.
3.
Turn on the power to the VM200 by depressing the power but-
ton on the rear panel.
The VM200 displays the Fostex and VM200 logos, then the CHAN-
NEL EDIT function page. (For more information on the CHANNEL EDIT
function page, see “The Channel Edit Function Page” on page 49.)
4.
Make sure the volume on your monitor amplifier is not set too
loud, then turn on the power to the monitor amplifier.
When you turn off the power to the VM200, be sure to follow this
sequence in reverse. (That is, first turn off the monitor amplifier, then
the VM200, then the sound sources.)
Warning: Turn off the power to all connected electronic equipment
before making any connections to the VM200.