Fostex VM200 - Manual (Page 156)

Scene Memory
156 VM200 User’s Guide
Editing Scene Memory Titles
You can edit scene names by recalling a scene and re-naming it.
Refer to the “Recalling Mix Scenes” on page 151 and “Storing Mix
Scenes” on page 154 for more information.
Recall Safe Function
When you recall a scene, all parameters are updated with settings
from the new scene. However, in some cases you may wish to retain
the settings for specific channels or parameters.
The VM200 features a Recall Safe function that enables you to desig-
nate channels and certain parameters as “recall safe.” When a new
scene is recalled, “safe” channels and parameters are not updated.
Recall Safe settings are available for each input channel 1-20 and for
the following parameters:
❑ Channel Fader
❑ Channel Pan
❑ Channel On
❑ Routing
❑ AUX1, AUX2, AUX3, AUX4
❑ EFF1, EFF2
❑ EQ
❑ EQ On
You can specify safe channels using the CH RCL SAFE function page. You
can specify safe parameters on the RCL SAFE function page.
Specifying Recall Safe Channels
The VM200 features a Recall Safe function that enables you to desig-
nate input channels 1-20 as “recall safe.” When a new scene is
recalled, “safe” channels are not updated.
1.
Press the [SYSTEM] key three times.
The VM200 displays the 3:CH RCL SAFE function page. All selectable
[EQ EDIT] keys flash.
2.
Select a channel layer by pressing Page Select key [1–8 ANA-
LOG IN] , [9–16 ADAT IN] , or [17–20 EFF RTN] .